Ways to Replace an Alternator on an ML350 1Disconnect the negative cable from the battery utilizing a wrench to loosen the terminal nut.2Loosen the belt tensioner using a wrench and eliminate the accessory belt from the Mercedes.3Remove the inner liner from the proper fender working with a wrench to remove the bolts.
Unplug the voltage regulator from the alternator Auto diagnostics. Disconnect the electrical wires employing a wrench to take away the nuts.4Remove the mounting bolts from the alternator having a socket and ratchet. Pull the alternator out in the ML350.5Put the new alternator inside the Mercedes and tighten the mounting bolts using the socket and ratchet.
Plug the voltage regulator into the alternator. Connect the electrical wires and tighten the nuts with a wrench auto diagnostic software. Set up the inner fender liner and tighten the bolts using the wrench.6Place the accessory belt on the engine and tighten the belt by tightening the bolt on the belt tensioner. Connect the battery cable and tighten the terminal nut with the wrench.
Related articles:
没有评论:
发表评论