The best way to Study the Check Engine Light on a Honda 1Locate the OBD scan post on the car: This will be positioned for the left from the fuse panel, inside the driver's side footwell. You don't need to eliminate the fuse panel to access it, but it will be slightly much easier to function in that spot if you do so.
Pull down on the fuse panel cover with your fingers to eliminate it.2Plug the OBD plug in to the 16-pin access port. This connector port in Hondas is readily visible, but in an effort to locate it automotive diagnostic tool, you can have to have to position yourself into the footwell region and look under the dash, towards the left of the fuse panel. The scan tool plug should connect to the access port with no difficulty.3Turn on the diagnostic scan tool and turn the ignition in your Honda to the " auto diagnostic;II" position.
4Wait for the scan tool display to read "OK," then shut off the ignition and unplug the scan tool.5Scroll through the menu selections on the scan tool until you come for the "Stored codes" section. Select "Stored codes" and use your Honda service manual to translate the difficulty codes you've retrieved.
Related articles:
没有评论:
发表评论